Where is it in the BYD SHARK?

Home › Models › BYD Shark › Where Is It?

BYD Shark

The BYD SHARK is a technologically advanced plug-in hybrid pickup. Familiarising yourself with its essential components can help you operate the vehicle safely and assist technicians during servicing. Our source materials do not contain the precise physical locations of every item within the vehicle’s cabin, engine bay, or load bed. This page explains the function of these key components and directs you on how to locate them. Always check your owner’s manual for exact diagrams.

Contents

Where in BYD SHARK is the fuse box

The fuse box contains the electrical fuses that protect the vehicle’s low-voltage circuits from overcurrent. If an interior accessory such as a puddle light or a 12V socket stops working, a blown fuse may be the cause. Please consult your owner’s manual to find the exact location of the relevant fuse box and the fuse diagram.

Where in BYD SHARK is the 12v battery

While the BYD SHARK is powered by a high-voltage traction battery (Blade Battery) and a 1.5-litre petrol engine, it still relies on a standard 12-volt battery to run low-voltage systems like the central locking, digital instrument panel, and infotainment touchscreen before the high-voltage system engages. To find the physical location of the 12V battery, you should refer to the technical drawings in the owner’s manual.

Where in BYD SHARK is the charging port

The charging port connects the vehicle to external AC and DC charging stations to replenish the 32.2 kWh Blade Battery. According to the vehicle’s specifications, the charging port is also used for the V2L (Vehicle-to-Load) feature, allowing you to draw power from the battery, alongside a secondary socket in the load-bed wall. For the precise exterior location of the charging flap, check your owner’s manual or confirm with an authorised BYD dealer.

Where in BYD SHARK is the OBD port

The On-Board Diagnostics (OBD) port is an interface that allows service technicians to connect diagnostic equipment to the vehicle’s computer systems. This is necessary for troubleshooting engine, hybrid powertrain, and electronic faults. BYD’s own procedure applies for all official diagnostics. The owner’s manual shows the exact position of the OBD port.

Where in BYD SHARK is the cabin air filter

The cabin air filter cleans the outside air before it enters the interior through the climate control system. A clean filter ensures optimal performance of the heating and ventilation system. The owner’s manual shows the exact position of the cabin air filter housing.

Where in BYD SHARK is the VIN number

The Vehicle Identification Number (VIN) is a unique code assigned to your specific pickup. It is required for insurance purposes, registering the vehicle, and ordering replacement parts. The owner’s manual shows the exact position of the primary VIN plates.

Where in BYD SHARK is the tyre repair kit

In the event of a puncture, the vehicle may be equipped with a tyre repair kit rather than a full-size spare wheel. Knowing where this equipment is stowed is crucial in an emergency. The owner’s manual will detail whether a repair kit is included and where it is stored within the cabin or load bed.

Where in BYD SHARK is the towing eye

The towing eye is a heavy-duty metal ring used to safely recover the vehicle if it becomes stranded. It screws into a specific reinforced point on the chassis. The exact storage location of the towing eye and the attachment points on the front and rear bumpers are detailed in the owner’s manual.

Where in BYD SHARK is the child lock

Child locks prevent the rear doors from being opened from the inside, providing safety for younger passengers. The official specifications state that the BYD SHARK features a mechanical child lock. The owner’s manual shows the exact position of the child lock.

Where in BYD SHARK is the jack point

Jack points are reinforced areas on the vehicle’s underbody designed to safely support the weight of the vehicle when using a jack. Lifting the vehicle incorrectly can cause severe structural damage. Always confirm with an authorised BYD service centre or consult your owner’s manual to locate the correct designated jack points before attempting to raise the vehicle.

Component summary

ComponentFunctionStatus
Charging portAllows AC/DC charging and V2L outputCheck manual for location
Child lockPrevents rear doors opening from insideMechanical type confirmed
12V batteryPowers low-voltage accessoriesCheck manual for location
OBD portDiagnostic interface for techniciansCheck manual for location

Frequently asked questions

Can I plug appliances into the charging port?

Yes, the vehicle features V2L technology, allowing you to draw power via the charging port or a socket in the load-bed wall.

Are the child locks electronic or mechanical?

The specifications confirm that the rear doors are fitted with a mechanical child lock.

Where can I find the correct jack points?

The correct lifting points are critical for safety and must be verified in the owner’s manual.

Can I replace the cabin air filter myself?

Replacing the filter is a routine maintenance task, but you should check your owner’s manual for instructions and to locate the housing.

Why do I need to find the OBD port?

The OBD port is used by technicians to run diagnostics; owners do not need to access it themselves. BYD’s own procedure applies for official fault-finding.

Next steps

Review your owner’s manual for complete component diagrams, or ask your local BYD dealer to demonstrate key features during handover.

See also

Sources