BYD SEAL suspension and tyres repair UK

Home › Models › BYD Seal › Repair › Suspension & Tyres

BYD Seal

The BYD SEAL is a high-performance, fully electric D-segment sports saloon launched in the UK in 2023. It is notable for being the first BYD vehicle to feature a sophisticated double wishbone front and five-link rear independent suspension setup. Because it is an electric vehicle with a heavy 82.5 kWh Blade Battery mounted low in the chassis via Cell-to-Body (CTB) technology, the suspension and tyres are engineered to handle a kerb weight ranging from 2,055 kg (Design) to 2,185 kg (Excellence).

This page covers general information on maintaining the vehicle’s ride dynamics. All suspension work is classified as dangerous work that can affect the structural integrity and handling of the vehicle. Always check your owner’s manual for basic tyre specifications and confirm with an authorised BYD dealer or qualified workshop for any mechanical repairs. BYD’s own procedure applies to all major suspension work.

Contents

  • Understanding the BYD SEAL suspension
  • Signs you need a BYD SEAL suspension repair
  • Tyre maintenance and specifications
  • Performing a BYD SEAL tyre pressure reset
  • Dealer-only suspension work
  • Frequently asked questions
  • See also
  • Sources

Understanding the BYD SEAL suspension

The BYD SEAL’s handling characteristics are defined by its advanced suspension geometry and high torsional stiffness (40,500 Nm/degree). The front uses a double wishbone arrangement, while the rear uses a five-link setup.

There are variations depending on the trim level. The all-wheel-drive Excellence trim enhances this setup with frequency-variable (semi-active) dampers, which adjust their response based on road conditions and driving style to optimise both comfort and control. The suspension works in tandem with the vehicle’s iTAC (Intelligent Torque Adaption Control) system and the four selectable drive modes (Eco, Normal, Sport, Snow).

Signs you need a BYD SEAL suspension repair

Due to the substantial gross vehicle weight (up to 2,631 kg for the Excellence trim) and the varying road conditions in the UK, suspension components such as bushes, dampers, and linkages can wear over time.

Owners should be aware of qualitative warning signs that might indicate a BYD SEAL suspension repair is required. These include knocking or clunking noises when driving over bumps, uneven tyre wear, the vehicle pulling to one side, or a noticeably harsher ride quality. If you experience any of these handling issues, you should read any associated dashboard messages, check your owner’s manual, and book a diagnostic appointment to confirm with an authorised BYD dealer.

Tyre maintenance and specifications

The BYD SEAL is fitted with 19-inch two-colour alloy wheels. The tyres play a critical role in the vehicle’s efficiency, transferring the 390 kW (530 PS) of power in the Excellence trim to the road, and contributing to the aerodynamic drag coefficient of 0.219 Cd.

Owners can safely check their tyres visually for adequate tread depth, cuts, bulges, or embedded objects. Maintaining the correct tyre pressure is essential for maximising the combined WLTP range of up to 354 miles and ensuring safe handling. The vehicle does not come with a traditional spare wheel; instead, a tyre repair kit is provided for emergency use.

Performing a BYD SEAL tyre pressure reset

The vehicle is equipped with a Tyre Pressure Monitoring System (TPMS) that alerts the driver if the pressure in one or more tyres drops below the specified level. After inflating your tyres to the correct pressure (as detailed in the manual) or after having a tyre repaired or replaced, the system may need to be recalibrated.

To perform a BYD SEAL tyre pressure reset, navigate through the menus on the 15.6-inch rotatable touchscreen or the 10.25-inch instrument display, following the specific sequence outlined in your owner’s manual. If the warning light remains illuminated after attempting a reset and ensuring all tyres are correctly inflated, there may be a fault with a TPMS sensor, which requires professional attention.

Dealer-only suspension work

Any work involving the replacement of coil springs, semi-active dampers, control arms, or performing wheel alignments is dealer-only work. Proper alignment requires specialised equipment to ensure the vehicle tracks straight, particularly given the advanced ADAS features like Lane Keep Assist and the 360° camera, which rely on the vehicle’s mechanical baseline being perfectly calibrated. High-voltage components are routed under the vehicle, so untrained mechanics must not attempt underbody repairs. Confirm with an authorised BYD dealer for all suspension overhauls.

Frequently asked questions

How do I do a BYD SEAL tyre pressure reset?

Inflate the tyres to the correct pressure and follow the reset procedure via the infotainment touchscreen as detailed in your owner’s manual.

What kind of suspension does the BYD SEAL have?

It features a double wishbone front and five-link rear independent suspension. The Excellence trim adds frequency-variable (semi-active) dampers.

Is a BYD SEAL suspension repair something a regular garage can do?

Suspension work is complex and involves recalibrating advanced electronics. You should confirm with an authorised BYD dealer or a qualified EV specialist.

Is the BYD SEAL fully electric?

Yes, the BYD SEAL is a fully electric D-segment sports saloon and does not have a petrol engine.

See also

Sources