BYD Atto 2 suspension repair and tyre guidance

Home › Models › BYD Atto 2 › Repair › Suspension & Tyres

BYD Atto 2

The BYD Atto 2 uses different suspension configurations depending on the trim level. This page details what owners need to know regarding BYD ATTO 2 suspension repair and handling a BYD ATTO 2 tyre pressure reset for the standard wheels.

All mechanical repairs must be handled by an authorised BYD dealer or qualified workshop. Confirm with an authorised BYD dealer / service centre if you experience handling issues. BYD’s own procedure applies to component replacement.

Contents

  • BYD Atto 2 suspension repair
  • BYD ATTO 2 tyre pressure reset
  • Warning signs and dashboard checks
  • Frequently asked questions

BYD Atto 2 suspension repair

The fully electric BYD Atto 2 features front MacPherson suspension across all versions. At the rear, the entry-level Boost trim is fitted with a torsion beam suspension setup, while the higher-specification Comfort trim utilises a multi-link rear suspension. The kerb weight differs slightly as well, with the Comfort model weighing 1,720 kg and the Boost model weighing 1,590 kg.

If the vehicle begins to handle poorly or makes unusual noises over bumps, a BYD ATTO 2 suspension repair may be required. Because the suspension interacts with the vehicle’s stability systems and the steering geometry, diagnosis and repair are dealer-only work. Do not attempt to replace shock absorbers or springs at home.

BYD ATTO 2 tyre pressure reset

Both trims of the BYD Atto 2 are equipped with 17-inch alloy wheels. Maintaining the correct inflation is vital for the electric range, safety, and even wear. If the system detects a drop in pressure or if you inflate a tyre, you will need to perform a BYD ATTO 2 tyre pressure reset to calibrate the sensors.

To clear the warning light, read the dashboard message and check your owner’s manual for the exact reset steps through the 12.8-inch rotatable touchscreen. Ensure all tyres are inflated to the recommended cold pressure before initiating the reset.

Warning signs and dashboard checks

A persistent warning light on the 8.8-inch digital instrument panel indicates a fault with the tyre pressure monitoring system or the stability control. Owners can safely check the physical condition of the 17-inch tyres and ensure there are no visible punctures or excessive wear. For any complex suspension faults, consult an authorised dealer.

Frequently asked questions

Do both trims have the same suspension?

No, while both have front MacPherson suspension, the Boost trim has a torsion beam rear setup, and the Comfort trim features multi-link rear suspension.

How do I complete a BYD ATTO 2 tyre pressure reset?

Check your owner’s manual for the specific software steps to reset the system via the infotainment screen.

Is BYD ATTO 2 suspension repair covered under warranty?

Suspension components may be subject to wear and tear. Confirm coverage with an authorised BYD dealer.

What size are the standard wheels?

Both the Boost and Comfort trims of the BYD Atto 2 are fitted with 17-inch alloy wheels.

See also

Sources