Finding Components in the New BYD Seal U DM-i

Home › Models › BYD Seal U DM-i › Where Is It?

BYD Seal U DM-i

The New BYD Seal U DM-i is a 5-seat plug-in hybrid SUV combining a 1.5-litre petrol engine with a traction battery (Blade Battery) and electric motors. This guide explains how to locate essential parts of the vehicle for basic maintenance and daily use. The exact physical locations are not detailed in the specification sheet; the owner’s manual shows the exact position for each item. Check your owner’s manual and confirm with an authorised BYD dealer / service centre if you require assistance. BYD’s own procedure applies to all maintenance tasks.

Contents

  • where in New BYD Seal U DM-i is the fuse box
  • where in New BYD Seal U DM-i is the 12v battery
  • where in New BYD Seal U DM-i is the charging port
  • where in New BYD Seal U DM-i is the OBD port
  • where in New BYD Seal U DM-i is the cabin air filter
  • where in New BYD Seal U DM-i is the VIN number
  • where in New BYD Seal U DM-i is the tyre repair kit
  • where in New BYD Seal U DM-i is the towing eye
  • where in New BYD Seal U DM-i is the child lock
  • where in New BYD Seal U DM-i is the jack point
  • Frequently asked questions

where in New BYD Seal U DM-i is the fuse box

The fuse box protects the electrical circuits inside the vehicle, including the 15.6-inch rotatable touchscreen and the Infinity 10-speaker audio system. Replacing a blown fuse is necessary if an electrical component stops functioning. The owner’s manual shows the exact position of the fuse box and provides the diagram detailing the correct rating for each circuit. High-voltage components must not be opened by owners.

where in New BYD Seal U DM-i is the 12v battery

The 12v battery powers the low-voltage electronics, such as the digital instrument panel, lights, and the infotainment system, before the high-voltage traction battery engages. The owner’s manual shows the exact position of the 12v battery. Only a qualified workshop should handle battery testing or replacement.

where in New BYD Seal U DM-i is the charging port

The New BYD Seal U DM-i uses a CCS2 charging port, which supports AC charging up to 11 kW and DC charging up to 18 kW. Finding the port is essential for recharging the Blade Battery at home or at public stations. The owner’s manual shows the exact position of the CCS2 charging port on the vehicle exterior.

where in New BYD Seal U DM-i is the OBD port

The On-Board Diagnostics (OBD) port connects diagnostic equipment to the vehicle’s computer to read fault codes from the Super Hybrid DM-i powertrain and other systems. The owner’s manual shows the exact position of the OBD port. Check with an authorised BYD dealer / service centre for professional diagnostic reading.

where in New BYD Seal U DM-i is the cabin air filter

The cabin air filter forms part of the PM2.5 air-purification system, keeping dust and particles out of the passenger compartment. It requires periodic replacement to maintain air quality. The owner’s manual shows the exact position of the cabin air filter housing.

where in New BYD Seal U DM-i is the VIN number

The Vehicle Identification Number (VIN) is a unique code required for insurance, registration, and ordering correct parts. The owner’s manual shows the exact position of the VIN number. You can also ask your dealer where the identification plates are mounted on the vehicle.

where in New BYD Seal U DM-i is the tyre repair kit

The vehicle requires a tyre repair kit to handle punctures, as it uses 19-inch alloys (235/50 R19). The owner’s manual shows the exact position of the tyre repair kit within the 425-litre boot space.

where in New BYD Seal U DM-i is the towing eye

The towing eye is a metal loop necessary for recovering the vehicle if it breaks down. Using the correct recovery points prevents damage to the chassis. The owner’s manual shows the exact position of the towing eye and its mounting points.

where in New BYD Seal U DM-i is the child lock

The child lock mechanism stops the rear doors from being opened from the inside. The owner’s manual shows the exact position of the child lock switches on the rear doors.

where in New BYD Seal U DM-i is the jack point

The jack points are structural areas designed to support the vehicle’s 1,940 kg to 2,100 kg kerb weight when lifting it for a wheel change. The owner’s manual shows the exact position of the correct lifting points.

Frequently asked questions

Can I find where in New BYD Seal U DM-i is the charging port without the manual?

The owner’s manual shows the exact position of the CCS2 charging port on the vehicle. Check the body panels, or consult a qualified workshop if you cannot locate it.

Does the manual explain where in New BYD Seal U DM-i is the fuse box?

Yes, the owner’s manual shows the exact position of the fuse box and lists the circuits it protects.

Can I use the OBD port myself?

While the OBD port is accessible, interpreting the error codes for the plug-in hybrid system requires correct equipment. BYD’s own procedure applies to professional diagnostics at an authorised BYD dealer.

Who can replace the 12v battery?

The owner’s manual shows the exact position, but due to the complex electrical systems, replacement should be carried out by an authorised BYD dealer / service centre.

See also

Sources