Home › Repair guides › BYD Tyre Pressure Reset UK
Performing a BYD tyre pressure reset is an essential maintenance task for all owners in the UK. We clarify what the monitoring system does, how to verify warnings, and when to seek technical support.
Contents
- What is it?
- BYD cars relevant to this guide
- What you can check
- Dealer-only repairs and warranty
- Frequently asked questions
- See also
- Sources
What is it?
The monitoring system continuously tracks the air pressure inside the wheels. It displays a clear warning on the driver screen if a wheel loses pressure.
BYD cars relevant to this guide
The manufacturer alters the interface positioning across different platforms.
Fully electric models
Our index of 100% electric models is as follows:
- BYD Dolphin Surf: Where | Mend
- BYD Dolphin: Where | Mend
- BYD Atto 2: Where | Mend
- BYD Atto 3 Evo: Where | Mend
- BYD Seal: Where | Mend
- BYD Sealion 7: Where | Mend
Plug-in hybrid models
The plug-in hybrid electric vehicles equipped with a 1.5-litre petrol engine and a Blade Battery are:
- BYD Dolphin G DM-i: Where | Mend
- BYD Atto 2 DM-i: Where | Mend
- BYD Seal U DM-i: Where | Mend
- BYD Seal 6 DM-i: Where | Mend
- BYD Seal 6 DM-i Touring: Where | Mend
- BYD Sealion 5 DM-i: Where | Mend
- BYD Ti 7: Where | Mend
- BYD Shark: Where | Mend
What you can check
After inflating a wheel, read the dashboard message and the printed instructions to perform the BYD tyre pressure reset. The interface for this process varies heavily by model. Inspect the rubber visually for punctures or external damage. Verify the correct inflation values printed on the vehicle information label.
Dealer-only repairs and warranty
If the warning light remains illuminated after inflation and a reset, an internal sensor might have failed. Replacing a transmitter inside the wheel and pairing it with the vehicle computer requires an authorised service centre. Defective sensors are covered by the warranty, whereas damage from a puncture or a third-party fitter is not.
Frequently asked questions
How do I complete a BYD tyre pressure reset?
Adjust the air pressure in all four wheels to the recommended level, then follow the steps in the printed instructions to recalibrate the software via the touchscreen.
See also
Browse the UK cars, Hybrids here, and Electric range.
Sources
Primary facts originate from BYD UK model information at https://www.byd.com/uk. The corporate BYD UK media site operates at https://bydukmedia.com. Do not forget to consult the owner’s manual for your model; just ask your BYD dealer.