Component locations in the BYD Atto 2

Home › Models › BYD Atto 2 › Where Is It?

BYD Atto 2

Finding specific parts and connections in your fully electric BYD Atto 2 can be necessary for routine checks, charging, and maintenance. This page covers the purpose of essential components and how to locate them.

BYD’s published information does not hold the physical locations. The owner’s manual shows the exact position for each item. Confirm with an authorised BYD dealer / service centre if you cannot find a component. BYD’s own procedure applies to any maintenance.

Contents

  • where in BYD ATTO 2 is the fuse box
  • where in BYD ATTO 2 is the 12v battery
  • where in BYD ATTO 2 is the charging port
  • where in BYD ATTO 2 is the OBD port
  • where in BYD ATTO 2 is the cabin air filter
  • where in BYD ATTO 2 is the VIN number
  • where in BYD ATTO 2 is the tyre repair kit
  • where in BYD ATTO 2 is the towing eye
  • where in BYD ATTO 2 is the child lock
  • where in BYD ATTO 2 is the jack point
  • Frequently asked questions

where in BYD ATTO 2 is the fuse box

The fuse box protects the vehicle’s electrical circuits from overloads. If an accessory or interior system stops working, a blown fuse may be the cause. The owner’s manual shows the exact position of the fuse box and provides a diagram identifying each circuit. High-voltage components must not be opened by owners; only check low-voltage accessory fuses.

where in BYD ATTO 2 is the 12v battery

Like other electric vehicles, the BYD Atto 2 uses a 12-volt battery to power low-voltage systems such as the central locking, interior lights, and the 12.8-inch rotatable touchscreen. The owner’s manual shows the exact position of the 12v battery. Consult an authorised BYD dealer if the battery requires testing or replacement.

where in BYD ATTO 2 is the charging port

The charging port is the connection point for replenishing the vehicle’s Blade Battery. The BYD Atto 2 supports up to 11 kW AC charging and up to 155 kW DC fast charging on the Comfort trim. The owner’s manual shows the exact position of the port on the vehicle’s exterior. Ensure the port is kept clean and free from debris.

where in BYD ATTO 2 is the OBD port

The On-Board Diagnostics (OBD) port allows technicians to interface with the vehicle’s computer systems to read diagnostic codes. The owner’s manual shows the exact position of the port. Accessing the OBD port is a task for an authorised BYD dealer / service centre during scheduled maintenance or troubleshooting.

where in BYD ATTO 2 is the cabin air filter

The cabin air filter cleans the air entering the interior through the climate control system. Maintaining it ensures optimal air quality and efficiency of the standard heat pump. The owner’s manual shows the exact position of the filter and outlines when it should be replaced.

where in BYD ATTO 2 is the VIN number

The Vehicle Identification Number (VIN) is a unique code used to identify your specific car for registration, insurance, and warranty purposes. The owner’s manual shows the exact position of the VIN. It is required when booking a service or checking for updates with an authorised BYD dealer.

where in BYD ATTO 2 is the tyre repair kit

In the event of a puncture to one of the 17-inch tyres, the vehicle is equipped with a tyre repair kit instead of a traditional spare wheel. The owner’s manual shows the exact position of the kit. The kit is designed for temporary repairs to allow the vehicle to reach a safe location or a tyre centre.

where in BYD ATTO 2 is the towing eye

The towing eye is a heavy-duty metal ring used to secure the vehicle if it needs to be recovered or pulled onto a flatbed truck. The owner’s manual shows the exact position of the towing eye and the mounting points on the front and rear bumpers. BYD’s own procedure applies to vehicle recovery.

where in BYD ATTO 2 is the child lock

The child lock mechanism prevents the rear doors from being opened from the inside, ensuring the safety of younger passengers. The owner’s manual shows the exact position of the child lock switch or lever. Confirm the locks are engaged before setting off.

where in BYD ATTO 2 is the jack point

Jack points are reinforced areas on the vehicle’s chassis designed to bear the weight when lifting the car, for example, to change a wheel. Using incorrect areas can damage the battery top cover or the Cell-to-Body (CTB) structure. The owner’s manual shows the exact position of the jacking points.

Frequently asked questions

Can I replace the 12v battery myself?

High-voltage systems and related components must not be opened by owners. Confirm with an authorised BYD dealer / service centre for 12v battery replacement.

Where can I find the fuse diagram?

The fuse diagram is printed in the owner’s manual, which also details the function of each fuse.

How do I open the charging port?

The owner’s manual shows the exact position of the charging port release mechanism and provides instructions on how to operate it safely.

Is the OBD port for owner use?

The OBD port is intended for diagnostic equipment used by an authorised BYD dealer / service centre.

See also

Sources