Home › Models › BYD Atto 3 EVO › Repair › Suspension & Tyres
This model uses a MacPherson strut front suspension and a five-link rear suspension. It is equipped with 18-inch alloy wheels as standard across the range. Complex work like BYD ATTO 3 EVO suspension repair must be handled by an authorised technician.
Contents
- BYD ATTO 3 EVO tyre pressure reset
- BYD ATTO 3 EVO suspension repair
- Vehicle dimensions and capacities
- Frequently asked questions
BYD ATTO 3 EVO tyre pressure reset
To perform a BYD ATTO 3 EVO tyre pressure reset, check your owner’s manual for the exact menu navigation. Proper tyre pressure is required for safe handling and efficiency. Confirm with an authorised BYD dealer if the system shows a continuous fault.
| Specification | Details |
|---|---|
| Front suspension | MacPherson |
| Rear suspension | Five-link |
| Wheels | 18-inch alloy |
BYD ATTO 3 EVO suspension repair
A BYD ATTO 3 EVO suspension repair involves structural and alignment checks. This is dealer-only work. BYD’s own procedure applies for component replacement to maintain warranty coverage.
Vehicle dimensions and capacities
The suspension manages the weight and load of the vehicle. The overall dimensions are 4,455 mm in length, 1,875 mm in width, and 1,615 mm in height, with a wheelbase of 2,720 mm. The boot offers 490 litres of capacity, expanding to 1,360 litres with the seats folded. There is also a 95-litre front boot. The maximum braked towing capacity is 1,500 kg.
Frequently asked questions
Can I adjust the suspension alignment myself?
Alignment work is for an authorised BYD dealer or qualified workshop.
Does the vehicle have a tyre repair kit?
The owner’s manual shows the exact position of the tyre repair kit.
What should I do if a tyre loses pressure rapidly?
Stop safely, read the dashboard message and the owner’s manual, and contact a recovery service or dealer.
Are the wheels the same on both trims?
Both the Design and Excellence trims feature 18-inch alloy wheels.
What is the rear suspension type?
The vehicle features a five-link rear suspension.
Battery technology
The BYD ATTO 3 EVO features a 74.8 kWh Blade Battery (LFP) with Cell-to-Body (CTB) technology. Built on an 800V architecture, the model achieves DC charging speeds up to 220 kW, completing a 10-80% charge in 25 minutes. AC charging works at 11 kW, completing a full charge in 8 hours. A heat pump is standard on all versions. The Design trim provides a WLTP combined range of 316 miles and a city range of 441 miles. The Excellence trim offers a WLTP combined range of 292 miles and a city range of 391 miles. The vehicle supports Vehicle-to-Load (V2L) at 3 kW for powering external devices.
See also
Sources
BYD UK model information: https://www.byd.com/uk BYD UK media site: https://bydukmedia.com Owner’s manual for your model – ask your BYD dealer