Home › Models › BYD Shark › Repair › Suspension & Tyres
The BYD SHARK is designed for both heavy-duty work and comfortable daily driving. To achieve this, it uses a ladder-frame chassis with double-wishbone suspension at both the front and rear, providing independent wheel articulation for its intelligent all-wheel drive system. Supporting its 2,710 kg kerb weight and offering 210 mm of laden ground clearance requires robust components. This page covers how to maintain the suspension, monitor tyre health, and address warning signs.
Contents
- BYD SHARK suspension repair
- BYD SHARK tyre pressure reset
- Warning signs and owner checks
- Safety and dealer repairs
- Frequently asked questions
- See also
- Sources
BYD SHARK suspension repair
The double-wishbone setup and ladder-frame chassis are built to handle the dedicated terrain modes for sand, mud, snow, and gravel, as well as a 790 kg payload. However, aggressive off-road use or carrying heavy loads continuously can accelerate wear on bushes, dampers, and springs.
If you notice a deterioration in ride quality or handling, a BYD SHARK suspension repair may be required. Replacing suspension components is considered dangerous work due to the extreme tension held by the coil springs and the weight of the vehicle. You must not attempt to dismantle the suspension yourself. BYD’s own procedure applies to ensure correct alignment and torque settings are applied, maintaining the structural stiffness provided by the Cell-to-Chassis integration.
BYD SHARK tyre pressure reset
The vehicle comes fitted with 18-inch wheels (black/silver two-tone as standard) and a Tyre Pressure Monitoring System (TPMS). Maintaining the correct tyre pressure is vital for achieving the best fuel economy from the Super Hybrid DMO powertrain and ensuring the vehicle handles safely.
If a tyre loses pressure, a warning will display on the 10.25-inch digital instrument panel. After inflating the tyres to the correct specification, you may need to perform a BYD SHARK tyre pressure reset to clear the warning message. Always check your owner’s manual for the exact menu navigation required on the infotainment screen or instrument cluster to initiate the reset procedure.
Warning signs and owner checks
Owners should regularly inspect their vehicle for signs of wear and tear, especially after driving in challenging off-road conditions.
| Area of concern | What to look for | Action required |
|---|---|---|
| Tyres | Uneven tread wear, cuts, or bulges in the sidewall | Replace tyre and check alignment |
| Suspension | Clunking noises over bumps or a sagging ride height | Book a diagnostic inspection |
| TPMS | Persistent warning light after a tyre pressure reset | Consult an authorised dealer |
| Steering | Steering wheel vibration or pulling to one side | Professional tracking/alignment check |
As an owner, you can safely perform visual checks of the tyre tread depth and use a reliable gauge to check pressures.
Safety and dealer repairs
Because the suspension interacts with the intelligent all-wheel drive and various safety systems, professional oversight is mandatory. If you suspect an issue with the chassis or suspension geometry, confirm with an authorised BYD dealer before continuing to use the vehicle for towing or heavy loads.
Working underneath a 2,710 kg vehicle is inherently dangerous. Any professional BYD SHARK suspension repair will require specialised lifting equipment and a thorough understanding of the vehicle’s high-voltage cable routing to ensure the traction battery is not compromised during the repair. Confirm with an authorised BYD service centre to guarantee that genuine replacement parts are used.
Frequently asked questions
How do I perform a BYD SHARK tyre pressure reset?
Once the tyres are inflated to the recommended pressure, the TPMS can be reset via the vehicle’s settings menu. Please check your owner’s manual for the exact step-by-step instructions.
Is BYD SHARK suspension repair covered by warranty?
Suspension components are covered against manufacturing defects, but wear and tear from heavy off-road use or exceeding the payload limit may not be covered. Confirm with an authorised BYD dealer.
What type of suspension does the vehicle use?
The pickup utilises a robust double-wishbone suspension design on both the front and rear axles, attached to a ladder-frame chassis.
Can I change a tyre myself?
Always check your owner’s manual to see if you can safely change a wheel in an emergency and to locate the correct jack points.
Why is my TPMS light still on after inflating the tyres?
If the light remains illuminated after inflation and a reset attempt, the TPMS sensor itself may be damaged or require professional recalibration. BYD’s own procedure applies for diagnosing sensor faults.
Next steps
Check your tyre pressures regularly and contact your local BYD dealer if you suspect a suspension fault.
See also
Sources
- BYD UK model information: https://www.byd.com/uk
- BYD UK media site: https://bydukmedia.com
- Owner’s manual for your model – ask your BYD dealer